Semi Truck Brake Drum Puller

The ball seat wheel mounting system is also known as stud piloted, ball seat cap nut (bcn), and double cap nut (dcn) system. Sturdy load beam that provides over 12 of spread;

3204 1154211412 1234210012 1144210012 1234200072 MERCEDES

One person can easily set the tool in place and use for tough pulls even where there is little access to insert the jaws.

Semi truck brake drum puller. Uses three pulling chains to remove even the most stubborn drums. It comes with two forcing screws for standard and tall brake drums. Brake drum stud hole size must be confirmed for single wheel applications, however.

In addition to the 5 reach, the jaws are formed with a radius to maximize surface contact for large diameter. Tighten the manual screw to pull the tool tight. Shop 22 brake drum puller at northern tool + equipment.

Universal brake drum and rotor puller by otc®. A brand new drum comes at 419 millimeters or. I used rare earth neodymium magnets (1/4 x 3/4) to apply a strong bond between the edge of the tub and the wheel.

It has a usable spread of 17.5 inches and a maximum reach of 12.25 inches. It comes with two forcing screws for standard and tall brake drums. Handles large components such as brake drums, rotors, drive wheels, gears, flywheels, and pulleys one person can easily set the tool in place and use for tough pulls even where there is little access to insert the jaws.

Otc® brake drum and rotor puller (6980) 0. 20% off orders over $100* + free ground shipping** Capacity, 24in.l x 20 1/2in.w x 58 9/10in.h

Get yours online today and pick up in store. All conmet brake drums are compatible with ball seat systems in dual wheel applications. Brake drums have a wear limit which is the maximum inside diameter the brake drum is allowed to be.

It is not the brake shoes that require the puller. Shop for otc heavy duty drum and rotor puller with confidence at autozone.com. Choose hub socket rock/eat5 cr1798 stem/cr1643/ford fruehauf pro par euclid rock/eat4 choose pulling chains steel alum.

The puller is required to break the taper bond. Can be used with air tools to reduce time and fatigue. Kiene brake drum puller adapter.

Two adjusting screws on top and one on bottom, keep the puller. Jaws slide for easy placement and held by spring clips. It has a usable spread of 17.5 inches and a maximum reach of 12.25 inches.

One person can easily set the tool in place and use for tough pulls even where there is little access to insert the jaws. Eliminates the danger of using a large hammer to release a frozen drum. My truck came from a snow / salt region.

On 2/7/2014 at 3:16 am, don coatney said: Otc® brake drum and rotor puller (6980) 0. It has a usable spread of 17.5 inches and a maximum reach of 12.25 inches.

Semi's have concave wheels, which act as support for the tub. All this talk and nobody has mentioned why a puller is required. Covered by otc's lifetime warranty.

This wheel grabber/ wheel whiz adapter provides the safe way to remove a seized 16.5 brake drum. The magnets were attached with hot glue, but i would. This tool installs the front and rear crankshaft wear sleeves and seals.

The drum and the axle have a matched taper. Heavy duty brake drum and rotor puller. Handles large components such as brake drums, rotors, drive wheels, gears, flywheels, and pulleys.

It comes with two forcing screws for standard and tall brake drums. Jc whitney brake drum puller eastwood products brake drum puller hook this on the flange of the drum at three equally spaced points, with the center screw pressing on the center of the disk wheel axle flange or inside the center of the wire wheel hub. Parts are just part of what we do.

It eliminates lip flare on the wear sleeve and installs the seal properly. The brake drum (figure 5). This number is often cast on the outside of the drum it's allowed to be 422.1 millimeters or sixteen point six two inches.

Otc® brake anchor pin and bushing service set (5038) 0. Otc 6979 heavy duty brake drum and rotor puller. This is for your standard american trailer brake drum or drive axle drum.

Thus, my drums are seized. Provides up to 7 tons of force to remove frozen brake drums. The otc heavy duty brake drum and rotor puller handles large components such as brake drums, rotors, drive wheels, gears, flywheels and pulleys.

Pin on Work